Industrial UAV Systems
* Webcam and microphone are needed

Industrial UAV Systems
ONLINE LIVE COURSE (Instructor Present)

Entry Level - No prerequisite training but be prepared for "high-tech" topics
* Soldering station and some tools are needed
* Software needed - See below for specifics
* Webcam and microphone are needed

** No classes currently scheduled
This is a fairly popular course so there will be more scheduled after we finish the upcoming level 2 UAV coiurse, Remote Aerial Service Platform.

** Information about kit pickup **
Materials will be picked up after the course begins. This has typically been the first or second Friday of the course but this may change as we're back at the school more frequently.

Brief Course Overview

This is a course on the design, assembly, operation and maintenance of remote aerial vehicles to be used in industrial applications. We will cover all the individual components used to create these vehicles as well as how to calculate load and speed requirements to be able to make decisions as to which of these components would be best suited for your application. Students will learn to configure, troubleshoot, and where to purchase equipment needed to design, build, and maintain custom aerial vehicles specifically suited to the task needed.

** Important Class Information **
It should be stressed that this class demands a lot of technical application. Some of the key points are listed below. Please do not sign up for this course if you are not prepared to deal with fairly complex technological concepts.
  • We're teaching this course to prepare individuals for the perceived wide spread usage of remote aerial vehicles in all industries.
  • Students will learn to build from the component level frequently without any specific "step-by-step" directions from manufacturers.
  • There will be a great deal of soldering involved in the course.
  • These are not autonomous vehicles. We do not use GPS or any other navigation mechanisms. We feel this takes the student further away from the core understanding of the vehicle operation. * We do use this in our second level "Remote Aerial Service Platform" course.
  • The components of these vehicles are typically very cutting edge new technology. Students should not expect to find materials or equipment as part of a kit. These are not made by the same manufacturer nor do they have detailed interoperability diagrams. Therefore step-by-step, or the clearest of instructions is not at all expected. Please understand this fully and be prepared for it. Learning how to learn what to do, rather than what to do for this specific instance, is a core concept of the course.
  • As an example of the rate of technology change, most of what we are building will change within a few months. Often sooner. A vehicle from two years ago is nearly antique in comparison.
  • It is assumed that you have at least a small work area with tools and soldering equipment (or are willing to purchase)

Distance Learning Specifics
  • Students are expected to join the class during the listed hours.
  • Class time is for lecture, conversation, and Q&A
  • We do not record class sessions to be watched later (We do have pre-recorded videos on various class topics)

This has been one of our high demand courses that, like a few others, almost isn't possible do online. In order make this work, students will have to have the necessary equipment for soldering electronics, a well lit area, good ventilation and a place to store their work out of harms way. For some of our students this is a typical situation and would not be an issue but we do realize that this is not the case for all. Unfortunately though, this has to be the case so please understand this before registering. Having said that we did create the SMD Soldering Online course that will provide materials that could meet these requirements as well as the requirements for our other robotic courses. If you plan on building and maintaining UAVs and/or getting into the UAV industry having a dedicated electronics/robotics lab is really a necessity.

The online structure of class will consist of one hour live video conferencing for lecturing and questions and further time spent off class time working on necessary tasks.

The class website will contain device documentation, vendor information, technology concepts and videos.

Currently we will we using Webex as our video conferencing software. You do not need to make an account to join the live sessions. An email will be sent out to all students including the time and dates, web link to the meeting and password. You will need to have a webcam and microphone for this class.

Detailed Course Overview

UAV History
One of the topics in class is the evolution of these vehicles over the years, especially how quickly things have changed in just the past two or three years and how many peoples perception of a drone may be based on technology several revisions past (even though this might just be a few years back). Due to massive advances in electronic hardware, physical hardware, and configuration software these vehicles have decreased in sized, increased dramatically in speed, but also stability and control. These types of vehicles might look to some like toys, but in reality are highly specialized professional vehicles complete with telemetry feedback and first person video, capable of performing precision tasks much more efficiently than their earlier predecessors. We will always stay as close to the state of the art in this technology as possible which means the components used in class will change. Many recent innovations have been brought together to create such an advanced, small sized form factor vehicle that can still be utilized for practical use. Smaller toy drones do exist, but these vehicles have nowhere near the stability and control needed to operate outdoors in even mildly harsh environments. High powered small diameter brushless DC motors, faster microprocessors, and advanced stabilization software have all lead to the current iteration of these flying vehicles.

Flight Training
Piloting these aircraft is also a strong element of the class. In order to perform tasks in the field or in factory you will need to develop strong navigational skills, which is by no means an easy task. There are many toy drones you can buy that are incredible simple to fly because of all the control software enabled on them, but if you want to do anything more advanced, this is a major limitation. Another reason it's imperative to have the good flight skills is to understand the control software and how to tune an aerial vehicle to your needs. PID feedback loops, flight modes, and stick rates are just a portion of this. We do have simulation software and practice vehicles to provide training in these areas.

This technology is growing at an incredible rate and people are beginning to see these in one form or another in many places. The accessibility of toy indoor micro drones has created a high visibility of the UAV concept, yet what we want to impress upon everyone in class is that as the technology has decreased in sized to the point where they can look like toys, the power and velocity are increasing. So be fully aware that these are professional machines, and can be extremely dangerous. We've been teaching manufacturing course for many years now, and of all the dangerous shop equipment, these machines require a much higher sense of awareness and compliance to safety protocols.

Due to the safety requirements, as well as local regulations, we will discuss all the current requirements around the use of these vehicles and what students might want to do if they wish to use these for profit.

  • RF Communications
  • Antenna theory and practical application
  • Three phase brushless motor operation
  • Electronic Speed Controls
  • Battery Theory and Technology
  • Power Requirement Calculation
  • PID Control and computer based flight control
  • Soldering (This is a major part of class)
  • Composite Materials
  • Precision measuring tools
  • Hand tools
  • Community resources

Mailing List Signup - Click here to get notified of upcoming classes

Class Dates and Times:


You can register by phone between 9am and 4pm PDT

Please have the course name and start date ready.

Registering Online

Washington State colleges are now using CTCLink for all student services.
  • Follow the link below - login in or create an account
  • Go to "Student Homepage"
  • Choose "Manage Classes"
  • "Class Search and Enroll"
  • Choose Edmonds College and the quater (Control + F to search page)
  • Search for class name or number (Class Number will get you to where you want faster)
Online Registration Login Page - CTCLInk

NOTE - All our classes fall under "Special Topics: Manufacturing".

Contact Damian Cianci at if you have any questions.